BSHP for MV1 headphone re-cable for SONY MDR-MV1 headphones

・The Brise Audio team has designed this re-cable to take full advantage of the MDR-MV1's unique sound quality.
　※MDR-MV1 is a product of SONY.Click here for the MDR-MV1 product page

  ・Uses the well-proven 4-core YATONO wire material, and employs a unique high sound quality construction to take advantage of the MV1's features.

  ・We design appropriate materials, construction methods, and placement locations from many materials such as CNT*1, special electromagnetic wave absorption shield material*2, BS sheet*3, and other new materials.

  ・The headphone side plug uses a dedicated screw to secure it to the MDR-MV1.

  ・The player-side plug can be selected from Brise Audio's original 4.4mm, 2.5mm, 3-pole 3.5mm, or 4-pole 3.5mm (also supports GND separation).
 　It can be used for balanced, unbalanced, and ground-separated connections.

※1　In order to take advantage of the excellent properties of CNTs, we have developed the optimum material through repeated joint tests and comparative audits conducted by a national research institute and a cooperating material manufacturer. Excellent shielding capability. Excellent shielding ability. Various other useful physical properties. (The properties of CNTs vary depending on whether they are single-phase or multi-layered.)

※2　It is a material that absorbs electromagnetic waves and converts heat, which is very effective especially in the high-frequency band, consisting of seven layers. This is the core material used in all our high-grade cables, including our flagship cable MURAKUMO.

※3　BS sheet is a material that boosts the positive sound quality effects of other materials while having very little negative impact on sound quality.

 

BriseAudio original plug &NEUTRIK-XLR plug is used

BriseAudio's original plugs and NEUTRIK-XLR plugs were developed to improve sound quality and convenience. We chose NEUTRIK XLR cables for their sound quality and compatibility.

(product) line-up

BSHP for MV1- 5-pole Φ4.4mm plug 1.3m【model number：BSHPMV1-544】JAN：4570113631348
BSHP for MV1- 4-pole Φ2.5mm plug 1.3m【model number：BSHPMV1-425】JAN：4570113631355
BSHP for MV1- 3-pole Φ3.5mm plug 1.3m【model number：BSHPMV1-335】JAN：4570113631362
BSHP for MV1- 4-pole Φ3.5mm plug 1.3m【model number：BSHPMV1-435】JAN：4570113631379
BSHP for MV1- Φ6.3mm 1/4TRS plug 1.3m【model number：BSHPMV1-363】JAN：4570113631386
BSHP for MV1- 4-pin XLR plug 1.3m【model number：BSHPMV1-4X1】JAN：4570113631393
BSHP for MV1- 3-pin XLR plug 1.3m【model number：BSHPMV1-3X2】JAN：4570113631409

BSHP for MV1- 5-pole Φ4.4mm plug 2.5m【model number：BSHPMV1-544】JAN：4570113631416
 BSHP for MV1- 4-pole Φ2.5mm plug 2.5m【model number：BSHPMV1-425】JAN：4570113631423
BSHP for MV1- 3-pole Φ3.5mm plug 2.5m【model number：BSHPMV1-335】JAN：4570113631430
BSHP for MV1- 4-pole Φ3.5mm plug 2.5m【model number：BSHPMV1-435】JAN：4570113631447
BSHP for MV1- Φ6.3mm 1/4TRS plug 2.5m【model number：BSHPMV1-363】JAN：4570113631454
BSHP for MV1- 4-pin XLR plug 2.5m【model number：BSHPMV1-4X1】JAN：4570113631461
BSHP for MV1- 3-pin XLR plug 2.5m【model number：BSHPMV1-3X2】JAN：4570113631478

※The aging period takes about 150 hours to settle down.
*Sales will end when the planned sales quantity ends during the sales period or in limited quantities.

　※Please note that some specifications may be changed without prior notice for the purpose of product improvement. We appreciate your understanding.

Stores with BSHP for MV1 listening devices already deployed

The number of stores where you can listen to our products is expanding at any time. If there is no listening location near you, we can lend you the equipment directly (in Japan).
If the cables are deployed but are not available in the store for audition, please contact the store staff.