BSEP for Z1R earphone re-cable for SONY IER-Z1R earphones
The Brise Audio team has designed this re-cable to take full advantage of the IER-Z1R's unique sound quality.
We have been using the IER-Z1R as one of our reference earphones as a test device for product development since its initial release.
*IER-Z1R is a product of SONY.Click here for product information on IER-Z1R
Exclusive and original high sound quality construction
Same material as top grade MURAKUMO (CNT)note 1Special Electromagnetic Wave Absorption Shielding Material※2BS Sheet*3(including the following), and
IER dedicated terminals are used (because MMCX may damage the female terminals).
Brise Audio's original 4.4mm, 2.5mm, 3-pole 3.5mm, and 4-pole 3.5mm plugs (also supports GND separation) can be selected.
The sound we aimed for with the dedicated cable BESP for IER-Z1R is as follows.
≪ ≪ Our interpretation of the IER-Z1R's sound quality.
≪ → The sound we aimed for with this cable.
0The sound image has a firm contour and is rich in crispness.
→The following is a summary of the information in a way that is not cumbersome while increasing the amount of information to make the most of its features.
We aimed to create more texture.
0The high frequency range has a sparkling and unique charm.
→We aimed to further develop these characteristics.
0Rich low frequency with volume
→Tightened tight to make it easier to feel the kick and bass line.
0Type that firmly localizes the sound in the foreground instead of expanding the sound field
The goal was to clarify the sound image and increase the sense of realism while maintaining the same → characteristics.
0 wide bandwidth
→Without narrowing the bandwidth, we aimed for a fuller mid and low frequency range.
In order to take advantage of the excellent properties of CNTs, we have developed the optimum material through repeated joint tests and comparative audits conducted by a national research institute and a cooperating material manufacturer. Excellent shielding capability. Excellent shielding ability. Various other useful physical properties. (The properties of CNTs vary depending on whether they are single-phase or multi-layered.)
It is a material that absorbs electromagnetic waves and converts heat, which is very effective especially in the high-frequency band, consisting of seven layers. This is the core material used in all our high-grade cables, including our flagship cable MURAKUMO.
BS sheet is a material that boosts the positive sound quality effects of other materials while having very little negative impact on sound quality.
BSEP for Z1R- 5-pole Φ4.4mm L-type plug [Model number: BSEPZ1R-544MX] JAN: 4570113631300
BSEP for Z1R- 4-pole Φ2.5mm L-type plug [Model No.: BSEPZ1R-425MX] JAN: 4570113631317
BSEP for Z1R- 3-pole Φ3.5mm L-type plug [Model number: BSEPZ1R-335MX] JAN: 4570113631324
BSEP for Z1R- 4-pole Φ3.5mm L-type plug [Model number: BSEPZ1R-435MX] JAN: 4570113631331
*Sales will end when the planned sales quantity ends during the sales period or in limited quantities.
Straight type terminals are also available in addition to L-type terminals at the official store.
|製品名||BSEP for Z1R|
|Conductor||High-functionality high-purity copper conductor|
|Conductor structure||Quad Spiral構造|
|special processing||Tuning exclusively for IER-Z1R|
|Isolation||special high-functionality resin|
|Terminal||It depends on each specification.|
|Warranty period||1 year|
BSEP for Z1R Listening Machine Deployed Stores
We are continually expanding the number of stores where you can audition our product. If there are no stores nearby where you can listen to our product, it is also possible to lend it directly (within Japan).
Despite the equipment being available, if the demo cables are not out in the store, please ask the store staff.
◆e-Earphone Akihabara Store
(4.4mm to Z1R)
Postal Code: 164-0001, Nakano 5-52-15, Nakano-ku, Tokyo, 3F Nakano Broadway, Tel: 0120-189-248
(4.4mm to Z1R)