◆YATONO-MINI LE Line cable for portable audio

 
 YATONO-MINI LE, a line cable (mini-mini cable) for portable audio with balanced connection in mind, was created in the process of developing our original portable amplifier TSURANAGI.
A total of four types including unbalanced cables are available.

 
With portable amplifiers that allow balanced connections, there are some caveats to the connections and proper connection methods are required.
The YATONO-MINI LE is an item that can handle all of these and bring out the best in quality.

For information on which type of cable is required, please refer to the compatibility chart below.
 
The YATONO-MINI LE uses the same wire material as BriseAudio's flagship YATONO earphone cable.
For the plug, we use BriseAudio's original connector, which has been very well received. We also use CNT (carbon nanotube) and several other materials for post-processing to adjust the sound quality.
 

This product is based on the same concept as the YATONO-LE earphone re-cable.

This is a portable audio line cable (mini-mini cable) that allows you to feel the overwhelming potential of YATONO wire materials.
If you need a connection method that is not listed in the lineup, we can special order it for you.


 The balanced input side (4.4mm) of our mini-mini cable for balanced connection is designed for portable amplifiers(our TSURANAGI, Cayin C9, etc.,) which are wired with all 5 poles of 4.4mm.
Other balanced input terminals are also available by special order, so please feel free to contact us.

 


 

4.4mm and 3.5mm to 4.4mm[ YAMNLE-4435t44 ]2.5mm and 3.5mm to 4.4mm[ YAMNLE-2535t44 ]4.4mm to 4.4mm [ YAMNLE-44t44]3.5mm to 3.5mm [ YAMNLE-35t35 ]

【 Product lineup 】
YATONO-MINI-LE  4.4mm to 4.4mm [ MPN:YAMNLE-44t44 ]
 4-core + GND (5 poles) 

YATONO-MINI-LE  4.4mm & 3.5mm to 4.4mm [ MPN:YAMNLE-4435t44 ]
YATONO-MINI-LE  2.5mm & 3.5mm to 4.4mm [ MPN:YAMNLE-2535t44 ]
 8-core 


YATONO-MINI-LE  3.5mm to 3.5mm [ MPN:YAMNLE-35t35 ]
 4core
 
・Cable length 15cm (not including plug)
Other specifications are also available, so please contact us if you have any requests.


This is an example of using a portable amplifier with a fixed 4.4 mm (5-pin) balanced input. For other balanced inputs, please contact us.

 

 4.4 mm (player side, line output) to 4.4 mm (portable amplifier)
  ※If the GND (5 poles) is connected to the 4.4mm output on the player side.

 
 Connect 2 x 4.4mm & 3.5mm (player side, line output) to 4.4mm (portable amp)
※If GND (5 poles) is not connected to the 4.4mm output on the player side.

Hiby
R8, NewR6, R5(Need to be switched on the software side)
Astell&Kern
KANN ALPHA(Need to be switched on the software side)
SONY
NW-WM1Z, NW-WM1A, NW-ZX500series, NW-ZX300series

▶ Connect two 2.5mm & 3.5mm (player side, line output) to 4.4mm (portable amplifier)

▶  Unbalanced connection (3.5mm to 3.5mm) can be used without any problem.

Astell&Kern
KANN ALPHA, KANN CUBE, SP1000, SP1000M, SP2000, SE100, SE200, SR15, SR25, SA700
※AK products require line output to be specified on the software side.
※Be sure to insert the 3.5mm plug first; if the 2.5mm plug is inserted first, the balanced line output mode will not be activated.
Hiby
R6

※If you have any questions about products not listed, please feel free to contact us.
  The correspondence table will be updated as needed.
 
 

  YATONO-MINI LE
Conductor High performance high purity copper conductor
Conductor structure -
Insulation Special high functional resin
Terminal Special high functional resin
Terminal Barious types are available. Please refer to the product description.
Length

15cm (not including the length of the plug)

  ※Please note that some specifications may be changed without prior notice for the purpose of product improvement.